Overview
This diagram is a basic layout of a standard wiring configuration for a single entry with a beam to reflector distance less than 10ft. Measuring 60 inches from the top of the reflector to the ground and the top of the beam box to the ground will insure the beam is centered on the reflector. Make sure the counter is installed on the hinge side of the door.
Note: The reflector should be vertical in nature when setup. Initially do not peal the back off the reflector. The reflector should be held with clear scotch tape until the system is setup and working. The reflector has strong adhesive and will be damaged if removed.
Please click the cat to go forward
